Guides 4 min read

What Is CGNAT? Carrier-Grade NAT and What It Means for Proxies

Carrier-grade NAT lets one public IP serve hundreds of customers. It breaks port forwarding at home, and it's the reason mobile proxy IPs are so trusted.

CGNAT (carrier-grade NAT, also called large-scale NAT) is a technique ISPs and mobile carriers use to put many customers behind a single public IPv4 address. Your router already does NAT for the devices in your home; CGNAT adds a second layer of the same trick inside the provider's network, shared between whole neighbourhoods or thousands of phones. It exists because IPv4 addresses ran out, and it has side effects that matter both for home users and for anyone using proxies.

Why Carrier-Grade NAT Exists

IPv4 has about 4.3 billion addresses, and the regional registries handed out their last free blocks in the 2010s. Carriers adding millions of phones and broadband lines couldn't get enough public addresses, so they started giving customers private addresses and translating them to a smaller pool of public ones at the edge of their network. IPv6 solves the shortage properly, but much of the web still needs IPv4, so CGNAT remains common, especially on mobile networks.

How CGNAT Works

  1. Your device gets a private address from your router, such as 192.168.1.20.
  2. Your router's WAN side gets an address from the carrier, but it's not public. It's usually in 100.64.0.0/10, a range reserved for this purpose by RFC 6598.
  3. When you connect to a website, the carrier's CGNAT box rewrites the source to one of its public IPs and a free port, and keeps a table entry so replies find their way back.
  4. Hundreds or thousands of customers share each public IP at the same time, distinguished only by port numbers.

How to Tell If You're Behind CGNAT

Compare the WAN address your router reports with the public IP websites see:

  • Find the WAN or internet IP in your router's admin page.
  • Check your public IP with what is my IP.
  • If they differ, and especially if the router's address starts with 100.64 to 100.127, you're behind CGNAT.

A traceroute also shows it: the first hops after your router will be addresses in 100.64.0.0/10 or other private ranges.

# macOS / Linux
traceroute -n 1.1.1.1

# Windows
tracert -d 1.1.1.1

What CGNAT Breaks at Home

  • Port forwarding: you can't open ports to the internet because the public IP isn't yours. Self-hosted servers, some games and remote access tools stop working.
  • IP-based allowlisting: your public IP is shared with strangers and may change, so allowlisting it on a server is unreliable and lets others in.
  • Reputation spillover: if someone else behind the same IP misbehaves, you may get CAPTCHAs or blocks too.

Fixes include asking your ISP for a public IPv4 (sometimes for a fee), using IPv6, or using a tunnel or VPN with a public endpoint.

Why CGNAT Makes Mobile Proxies So Trusted

Here's the part that matters for proxies. Because a mobile carrier's public IP is shared by so many real phone users, websites know that blocking it would lock out a lot of legitimate customers. A single mobile IP can legitimately produce traffic from many devices, accounts and browsers at once. Sites therefore tend to give carrier IPs more leeway than any other kind of address.

That's the main reason mobile proxies have the best acceptance on strict platforms, and why they cost more per GB than residential. Our guide to residential vs mobile proxies covers when that premium is worth paying.

The flip side: carrier IPs move around. The carrier can reassign which public IP your traffic uses, so a mobile proxy session may change IP more often than a home connection would. For tasks that need one stable IP for a long time, keep sessions short and design for reconnection.

CGNAT and Residential Proxies

Some home broadband providers also use CGNAT, so a share of residential IPs are shared too. Most residential IPs, though, map to a single household. That gives residential IPs a cleaner one-user history, while mobile IPs get their trust from being shared. Both look like real people, which is why they pass checks that datacenter IPs fail.

Using Mobile Proxies With NodeProxies

NodeProxies mobile proxies route through 4G/5G carrier IPs in 50+ countries, using the same gateway and username format as residential. Rotate on every request, or keep an IP with a sticky session:

curl -x http://USERNAME-country-us-session-m1-time-10:[email protected]:8080 https://ipinfo.io/json

Mobile starts at $1.10/GB and drops with volume; see pricing or register and buy as little as 100 MB to test.

FAQ

What is the CGNAT IP range?

100.64.0.0/10 (100.64.0.0 to 100.127.255.255), reserved as shared address space by RFC 6598. Carriers can also use other private ranges internally.

Is CGNAT bad?

It's a workaround for IPv4 exhaustion. It's fine for browsing but breaks port forwarding and hosting, and it means you share IP reputation with other customers.

How do I get out of CGNAT?

Ask your ISP for a public IPv4 address, switch to IPv6 where your services support it, or use a VPN or tunnel service that gives you a public endpoint.

Why do mobile proxies rarely get blocked?

Because carrier IPs are shared by many real users through CGNAT, so blocking one would hit lots of legitimate customers. Sites usually challenge individual sessions instead.

NodeProxies

Ready to get started?

90M+ residential, mobile & datacenter proxies. Datacenter from $0.30/GB, residential from $0.42/GB. No contracts.

Create free account